Stainless steel 316 pipe fittings Stainless steel elbow
Stainless steel elbow, its production forming process is mainly
divided into the following. Stamping forming is the first forming
process used in batch production. At present, it has been replaced
by hot push or other forming processes in the production of elbow
with common specifications. However, it is still used in some elbow
specifications due to the special requirements of small production
quantity, too thick or too thin wall.
Technical data sheet
Stainless steel 316 pipe fittings Stainless steel elbow technical data sheet as below:
|DN||Outside diameter||Center to end dimensions|
|A Series||B Series||Long radius|
Standard:GB / ANSI /JIS / DIN
Size:1/8' ~ 6'
Application:oil,gas and so on
Stainless steel elbow is formed by the tube blank with the same
outer diameter as the elbow, which is directly pressed in the die
by the press. Before stamping, the tube blank is placed on the
lower die, the inner core and end die are loaded into the tube
blank, the upper die moves downward and begins to press, and the
elbow is formed by the constraint of the outer die and the support
of the inner die.
Stainless steel elbow is a cold extrusion forming process, using a
special elbow forming machine. The elbow made by cold extrusion
with internal and external dies has beautiful appearance, uniform
wall thickness and small size deviation, so it is often used for
stainless steel elbow, especially for thin-walled stainless steel
a. Plastic bubble bag package b.Wove bag package c.Pallet d.
Our Steel flat factory have high ability for production, the
delivery time is 25 days for small quantity, or if you are hurry
for that, we can arrange and meet your shipping date.